Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterCopperfield Chimney Cleaning & Sweep in Bangor: What to Know First
We provide independent Copperfield chimney cleaning and sweep services in Bangor, with most jobs scheduled within a few days and completed in a single visit. A standard Copperfield sweep and Level 1 inspection runs $199-$289, and we give you the full price before we start - no add-ons once we’re on the ladder. As an independent Copperfield service provider, we work on every series that has been installed in the Slate Belt, from the older Pro-Series stainless caps to the current Gelco-compatible chase covers.
This page is for the homeowner who knows they have Copperfield components on their chimney and wants them serviced by someone who can name the part without squinting at the label. If that is you, call (610) 609-7634. A live person answers, even at 6 a.m. on a Sunday.
How Copperfield Products Fail - and How We Fix Them
- Pro-Series chimney caps with warped lid seams. The 304 stainless steel lid on caps manufactured between 2010 and 2016 had a seam weld that does not hold up to Bangor’s freeze-thaw cycling. Water gets in, freezes, and the lid bows. We spot the warp during our camera inspection, source the correct replacement lid from Copperfield’s current catalog or a matching aftermarket, and re-bed the mesh sides with fresh sealant so the next freeze does not lift it.
- Chase cover corner rust-through on galvanized models. Copperfield’s pre-2012 galvanized chase covers were standard on many Bangor ranch homes, and the northeast corner always goes first because that is where wind-driven rain hits hardest on houses sited along the ridge lines above Martins Creek. We document the pitting with photos, show you the exact spots, and install a replacement in 24-gauge steel or copper if you want to match a historic restoration.
- Multi-flue cap screen clogging from heavy creosote. The Pro-Series multi-flue cap with 5/8-inch mesh works well until a wood stove burning green oak loads the screen from below. The mesh is not the problem; the combustion is. We clean the flue first, then pull and scrub the screen on the truck - never just blow it off from below, which packs creosote into the corners and voids the cap’s internal warranty on weld points.
- Damper handle seizure in the Pro-Series top-sealing line. The cast aluminum handle corrodes where it passes through the galvanized frame, especially on chimneys venting oil-fired appliances that produce acidic condensate. We free the mechanism, replace the handle with the current brass-alloy version Copperfield switched to in 2018, and advise you if the flue gas chemistry needs addressing.
- Flashing integration gaps where Copperfield caps meet non-Copperfield flue tiles. Bangor’s older homes, particularly the stone twins near the historic district, often have 8×13 flue tiles that do not match Copperfield’s standard base dimensions. The previous installer caulked and prayed. We fabricate a transition collar from stainless stock, sealed with high-temp silicone rated to 500°F, so the cap sits square and the warranty on the cap itself stays intact.
Our Copperfield Chimney Cleaning & Sweep Process
- 1
Call and schedule. A live person answers, asks what you are burning, how often, and whether you have had service before. We pull any prior Hearthstone inspection reports while you are on the phone.
- 2
Arrival and walk-around. Our technician, in uniform and background-checked, arrives in a marked truck. We look at the exterior cap, the crown condition, and any signs of water staining on the brick before we set a ladder.
- 3
Level 1 or Level 2 inspection with camera. For Copperfield systems, we run the camera past the smoke shelf to document creosote buildup, liner condition, and any gaps at the cap base. You see the photos on the tablet before we move to cleaning.
- 4
Sweep and component service. We rotary-brush the flue, HEPA-vacuum the smoke chamber, and service the Copperfield cap or damper on the roof. If a part needs replacement, we explain OEM versus quality aftermarket options - Copperfield parts when available, matched aftermarket when the OEM is back-ordered, always with the trade-off explained.
- 5
Final test and documentation. We do a draft test with the cap reinstalled, give you the photo report and written verdict, and apply the 90-Day Done Right Promise in writing. Most jobs finish in under three hours.
- 6
Cleanup and departure. Drop cloths come up, the hearth is vacuumed, and we are gone. The number on the estimate is the number on the invoice.
What Copperfield Chimney Cleaning & Sweep Costs in Bangor
| Service | Typical Range |
|---|---|
| Level 1 Inspection + Annual Sweep (single flue, standard access) | $199 - $289 |
| Level 2 Inspection with Camera (required for real estate or after chimney fire) | $289 - $389 |
| Pro-Series Cap Removal, Clean, and Reinstall | $149 - $219 |
| Chase Cover Replacement (galvanized to galvanized, standard size) | $649 - $949 |
| Damper Handle Replacement (Pro-Series top-sealing) | $189 - $279 |
| Custom Flashing Collar (non-standard flue tile) | $249 - $399 |
What moves the price: roof pitch above 6/12, multiple flues, creosote glazed to the point of needing chemical treatment, and accessibility issues like a narrow alley or deck obstruction. We tell you before we start if any of these apply. Call (610) 609-7634 for an exact quote - estimates are free, and we do not charge to look.
Why Bangor Homeowners Call Hearthstone Chimney Co. for Copperfield Work
We have been in this trade since 1984, and we plan to be here when your grandchildren own the house. That changes how we work. The 90-Day Done Right Promise is in writing, with no arguing - if it is not right, we come back. Russell Haines keeps that worn inspection mirror on his truck dashboard from his first year in the trade, and he still uses it on jobs where a camera will not fit. Our technicians are background-checked, uniformed, and trained on Copperfield, DuraFlex, HeatShield, and Gelco systems, so if your chimney has mixed brands from previous owners, we do not need to call around for parts. A clean flue does not need a sales pitch. We show you the photos, tell you what is wrong, and let you decide.
FAQs
No. As an independent Copperfield service provider, we follow the manufacturer’s published service guidelines, and routine cleaning by a qualified chimney professional does not void the limited lifetime warranty on Pro-Series stainless caps. Using a pressure washer on the mesh or installing non-matching replacement parts yourself can void it, which is why we document our work with photos. Call (610) 609-7634 if you need warranty paperwork for your records.
Most single-flue Copperfield systems in Bangor take 90 minutes to two hours from ladder set to final draft test. A multi-flue cap with heavy creosote, or a chase cover replacement, can run three to four hours. We book enough time so we are not rushing to the next job. Call (610) 609-7634 to schedule - we will tell you the expected duration when we book.
If the rust is surface-only and the pan is still structurally sound, we can sand, prime, and repaint with high-temp enamel for a fraction of replacement cost. If the rust has perforated the metal, especially at the corners or the chimney penetration, replacement is the only safe option - water intrusion behind the chase siding causes far more expensive damage than the cover itself. We show you the camera photos and give you both numbers. Call (610) 609-7634 for a free assessment.
Standard Pro-Series caps, dampers, and replacement lids are usually in stock or available within three to five business days. Custom chase covers in copper or non-standard dimensions take two to three weeks. We also keep quality aftermarket equivalents from Olympia Chimney and Famco on the truck for same-day completion when the exact OEM part is back-ordered. We explain the trade-off and let you choose. Call (610) 609-7634 to check current availability.
The National Fire Protection Association says annually for wood-burning systems, and we agree - especially in Bangor, where cold starts in October produce more creosote than steady winter burning. Oil and gas systems venting through Copperfield caps should be inspected annually and swept as needed, typically every two to three years unless the draft test shows restriction. We send reminder postcards because we would rather see you every year than after a chimney fire. Call (610) 609-7634 to set your annual appointment.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Bangor and nearby areas.