Gelco Chimney Liner & Rebuild Nationwide

Gelco Chimney Liner & Rebuild in Bangor: What to Know First

We provide independent Gelco chimney liner and rebuild service in Bangor and the surrounding Slate Belt, with most liner replacements and partial rebuilds completed in a single day and full rebuilds scheduled within the week. Our estimates are free, our pricing is upfront, and we do not recommend work without camera evidence you can see for yourself. A clean flue does not need a sales pitch.

Call (610) 609-7634

This page is for homeowners in Bangor, Roseto, and Pen Argyl who have a Gelco liner or chimney component that has failed, is showing age, or was flagged during an inspection. If you are trying to decide whether to repair or replace, or you have been told you need a full rebuild and want a second set of eyes, call us at (610) 609-7634. We answer live, 24 hours a day.

How Gelco Products Fail - and How We Fix Them

• Gelco Stainless Pro-Series liners with seam separation at the flex joints. We see this most often in Bangor’s pre-1950s homes near the historic district, where the original clay flue was oversized for the appliance and the Gelco flex liner was pushed past its bend radius during installation. The seam opens, creosote seeps behind the liner, and you smell smoke in the attic on cold mornings. We pull the damaged section, measure the flue properly, and install a new Gelco or DuraFlex segment with factory-approved couplers - no tape, no shortcuts.
• Gelco Multi-Fuel liners with accelerated corrosion in oil-to-gas conversions. Bangor has a fair number of older homes that switched from fuel oil to natural gas in the 1990s without updating the liner alloy. Gelco’s 316Ti stainless handles wood and oil fine, but sustained gas condensation drops the pH and pinholes the liner from the inside out. We camera the full length, document the pitting, and specify a 904L alloy or AL29-4C replacement if the appliance is staying gas - done right, and we stand behind it.
• Gelco rigid liner systems with spalling concrete at the thimble connection. The rigid sections expand and contract more than flex, and in Bangor’s freeze-thaw cycles the mortar around the thimble crumbles. We rebuild the thimble with proper refractory, install an expansion joint per Gelco’s spec, and seal it so water cannot get back in.
• Gelco top-mount dampers seized after a decade of Pennsylvania winters. The cast-aluminum frame corrodes where the stainless cable enters, especially on north-facing chimneys in the higher elevations toward Upper Mount Bethel. We can often free and reseal the damper, but if the frame is cracked we replace with a Gelco OEM or a Famco equivalent - whichever gets you a square deal with no surprises on the bill.
• Gelco chase covers with corner rust-through. The galvanized covers from the early 2000s were stamped with a drip edge that pools water at the corners. We’ve replaced dozens in Bangor’s Williams Township and East Bangor subdivisions. We measure on site, fabricate a new Gelco or Copperfield cover with cross-breaks for drainage, and caulk with high-temp silicone that holds past the next hard winter.

Our Gelco Chimney Liner & Rebuild Process

1. 1
   Call and schedule. A live person answers, asks what you are burning, how old the system is, and whether you have had a recent sweep. We book a Level-2 camera inspection with photos you can see and a plain-English verdict.
2. 2
   Inspection and documentation. Our technician runs a camera the full length of the flue, photographs every joint, every thimble, every course of brick. Russell Haines reviews the footage with you on site or sends it by email if you prefer. Nothing is recommended without evidence you can see.
3. 3
   Parts decision. If the Gelco liner can be saved with a section replacement, we say so. If the alloy is wrong for the fuel, we specify the correct grade. We keep Gelco, DuraFlex, and HeatShield materials on our trucks for most standard sizes, so we are not waiting on freight while your burning season slips away.
4. 4
   The repair. Background-checked, uniformed technicians complete most Gelco liner replacements and partial rebuilds in a single visit. Full rebuilds take longer, but we work continuous until the shell is weather-tight and the liner is tested.
5. 5
   Post-repair testing and documentation. We run another camera pass, perform a smoke test or draft test depending on the appliance, and give you a written report with photos. The 90-Day Done Right Promise goes in writing before we leave - no paperwork, no arguing.
6. 6
   Cleanup and follow-up. We tarp the work area, HEPA-vacuum the hearth, and leave the house as we found it. A live person follows up within two weeks to make sure the draft is holding and you have no questions.

What Gelco Chimney Liner & Rebuild Costs in Bangor

These are the ranges we see most often for Gelco systems in the Bangor area. Your exact estimate depends on flue length, access, and whether the existing liner can be extracted without dismantling the surround.

What moves the price: flue length over 25 feet, offset bends that require custom cutting, scaffold or roof-access difficulty, and whether the existing liner has collapsed and must be removed in pieces. We give you the full number before we start. Call (610) 609-7634 for a free estimate - we’ll be there when we say.

Why Bangor Homeowners Call Hearthstone Chimney Co. for Gelco Work

We are not a franchise, and we are not a one-truck operator who may answer the phone next year. Hearthstone Chimney Co. has served this area for over 42 years, and we plan to be here in thirty more. That changes how we work.

Our technicians know Gelco systems specifically - the Pro-Series flex, the Multi-Fuel alloys, the rigid snap-lock joints - because we have repaired them in Bangor homes for two decades. When a Gelco part is back-ordered or discontinued, we have DuraFlex and HeatShield materials that meet or exceed the original spec, installed warranty-safe by tradesmen who understand the difference. Every job carries the 90-Day Done Right Promise in writing: if it is not right, we come back. No arguing. In writing, no arguing.

Russell Haines keeps that worn inspection mirror on his truck dashboard - the first real tool he bought, still in use after a thousand jobs. It reminds us that the work speaks for itself.

FAQs